ExtremeSwitching (EXOS/Switch Engine) - Page 392 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ACL counters not showing

Hi, I have an ACL defined to manage general access between subnets across switches, and as part of that some rules have counters assigned to them. The problem I am having is that when I use the show access-list counter command, not all of my counte...

Switch reboot after Fatal exception: panic

Hi, We have an unexpected reboot in our switch Extreme Networks X670G2, these are the show switch and show logs, the switch before the reboot has the firmware 16.1.3.6. SBJ-EXT_AGREG.4 # show switch SysName: SBJ-EXT_AGREG SysLocation: ...

Trunk with DHCP for access point

Hi, I've a problem with my access point with my switches, i use Meraki platform for control WIFI. Normally i plug access point in my switches and i tag port but if i tag port access point don't have IP by my DHCP and are offline on my platform. If i...

DIAGNOSTIC FAIL: run test loopback eth iterations 50 pps-rate fast

ERROR: Timeout waiting on Rx Pkt [ifnum=0, ms=2000] ERROR: Receiving Pkt [ifnum=0, Iteration=1, Length=64] DIAGNOSTIC FAIL: run test loopback eth iterations 50 pps-rate fast

X440-G2-48p Stacking 10Gbe links, license error on slot2

Ok so I might have shot myself in the foot here but figured I post to ask... I have a stack of three X440-G2-48p switches, and prior to stacking I foolishly installed the 10GBe license on Slot 1 and Slot 3 as we were going to use 10Gbe uplinks (now ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN