poe+

[juan_romero]

HELLO, I´M HAVING A PROBLEM WITH X460 SWITCH RUNNING XOS 15.6.3.1, THINK IT IS NOT GIVING ME THE RIGHT POE, I´M USING ONE PORT TO CONNECT A 3COM SWITCH (3CNJ2000) THAT HAVE TWO POE PORTS AND IN BOTH PORTS I´M OBTAINING DATA BUT NO POWER TO FEED TWO AVAYA PHONES. HOW CAN I KNOW EXTREME IS GIVING ME THE CORRECT POWER TO FEED THE 3COM SWITCH? I HAVE TRIED SEVERAL INLINE-POWER CONFIGURATIONS WITH NO SUCCESS.

[juan_romero]

This is the output for that port.

Port 3:18

Configured Admin State: enabled
Inline Power State : delivering
MIB Detect Status : delivering
Label :
Operator Limit : 30000 milliwatts
PD Class : class4
Max Allowed Power : 30.0 W
Measured Power : 4.200 W
Line Voltage : 56.0 Volts
Current : 76 mA
Fault Status : None
Detailed Status : Delivering power to IEEE PD
Priority : high
Detection : 802.3af-only

[Henrique]

Hi Juan, please provide the output for show inline-power info detail port 3:18

[juan_romero]

Yes, I did it but did not work.

[Karthik_Mohando]

Hi Juan,

Did you got a chance to configure the "power-via-mdi with-classification" as mentioned in the article and test?

[juan_romero]

THE 3COM SWITCH WORKS PROPERLY WITH CISCO, DO YOU THINK THE PROBLEM IS ONLY WITH EXTREME SWITCHS?