Port cannot belong to VLAN and a VMAN at the same time.

[Drin]

Trying to configure QinQ solution between two extreme switches and im facing an issue when trying to make one of the ports untagged:

| Error: 8: Port cannot belong to VLAN and a VMAN at the same time.|

This port is not configured in any VLAN or VMAN as Untagged

This issue a get only in one SW, in the other one im able to configured the port as untagged.

The only difference between SW are the Image version running. But im not sure if that is the case?

[Drin]

Hi all,
First i want to thank you for the support.

Since i have a live network i was unable to perform the upgrade in image and i was wondering if someone can advice me for any other solution.

So what i need is QinQ solution.

SW-01
Port-01-Local(Multiple VLAN's)
Port-02-Outgoing(Fixed Single VLAN-324)

SW-02
Port-01-Local(Multiple VLAN's)
Port-02-Outgoing(Fixed Single VLAN-324)

Is there any possibilities rather then using VMAN to be able to communicate VLANs related to port 1 in both SW.

[Drin]

I was through documentation but couldn't find something related to my issue.

I will try to make SW2 same image version as SW1 and will update the post.

Thanks for your contribution

[Drew_C]

No worries. Just wanted to check.

[Drin]

Hi,

I still didnt get a chance to upgrade the switch.

I will update thread once done.