qinq
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-22-2016 06:50 AM
Hi Team,
I have configured qinq in extreme switch.
Getting incoming packets with qinq tagging.
I configured vman on the switch and assigned ingress and egress ports one with tagged(ingress) other one with "cep cvid" (egress).
I am seeing egress packet as qinq (as it is what i see int he ingress) . so the packet is not stripped some how.
Please help me in this.
I have configured qinq in extreme switch.
Getting incoming packets with qinq tagging.
I configured vman on the switch and assigned ingress and egress ports one with tagged(ingress) other one with "cep cvid" (egress).
I am seeing egress packet as qinq (as it is what i see int he ingress) . so the packet is not stripped some how.
Please help me in this.
7 REPLIES 7
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-22-2016 08:33 AM
Port "b" is the egress port right? you might need to include the "translate " keyword to the command.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-22-2016 08:23 AM
Hi,
This is also not working for me.
i have enabled the following commands.
outertag  (svlan)
innertag:y (cvlan)
create vman
configure vman tag "x"
configure vman" add ports "a" tagged
configure vman" add ports "b" cep cvid "y"
This is also not working for me.
i have enabled the following commands.
outertag  (svlan)
innertag:y (cvlan)
create vman
configure vman
configure vman
configure vman
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-22-2016 08:02 AM
If my understanding is correct, when the traffic egress out the port where "cep cvid" is configured, you would want the switch to include the CVID to the traffic and send it out the switch.
Which means VMAN double tag gets removed but will have the original TAG value and you would want to translate the original tag to CVID on the untag egress port.
If so, this configuration is required "configure vman add ports cep cvid translate '.
Which means VMAN double tag gets removed but will have the original TAG value and you would want to translate the original tag to CVID on the untag egress port.
If so, this configuration is required "configure vman
