cancel
Showing results for 
Search instead for 
Did you mean: 

"test etherchannel load-balance" analog

"test etherchannel load-balance" analog

eyeV
New Contributor III
Hi everybody.

Is there any analog of cisco "test etherchannel load-balance" command in ExtremeXOS?

1 REPLY 1

Sumit_Tokle
Contributor
Not sure if you are looking at below command,,

configure sharing address-based custom [ipv4[source-only| destination-only| source-and-destination] | hash-algorithm[xor|crc-16|crc-32[lower|upper]]

GTM-P2G8KFN