Remote mirroring trunk LACP

[Jhonn_Bejar]

I'm enabling remote mirroring, an LACP port sharing.
When applying the command:

enable sharing 22 grouping 22, 24 algorithm address-based L2 lacp
configure mirror to port 22 remote-tag 1000
configure mirror add port 23 ingress-and-egress
enable mirror

not allow me to enable mirroring, giving me the error:

Error: Port mirroring cannot be enabled on a trunk member port 22

please help

[Derek_Bird]

Jhonn:

Have you checked out this GTAC article?

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-remote-mirroring-through-...

[Jhonn_Bejar]

Without sharing if it works.
I had my production network and I can not disable sharing.
In conclucion having sharing, remote mirroring does not work.

[Jason3]

Well you could enable both ports as I did above with 22 and 24 But you cannot do one port of the lacp

[Jason3]

Johnn I was also unable and here is why You cannot mirror a Trunk port If you want to mirror that port then remove sharing of 22 and 24