RSPAN on EXOS

[Amir90]

Hi everyone,
I followed the configuration instructions in this post, but I still can't get RSPAN to work. Can anyone help, please?
https://extreme-networks.my.site.com/ExtrArticleDetail?an=000080241

Here is my topology and my configurations:

SW2:

create mirror Remote
configure mirror Remote to port 1 remote-tag 100
configure mirror Remote add port 4 ingress-and-egress
enable mirror Remote

SW-Mid:

create vlan remote-mirror
configure vlan remote-mirror tag 100 remote-mirroring
configure vlan remote-mirror add ports 1-2 tagged

SW1:

create vlan remote-mirror
configure vlan remote-mirror tag 100 remote-mirroring
configure vlan remote-mirror add ports 1 tagged
configure vlan remote_mirror add ports 5 untagged

I have Wireshark on analyzer PC and I can catch data when I set up SPAN but I cant capture any data when I set up RSPAN.

Any idea or any mistake I did here?

[Amir90 · Accepted solution]

Hi,
thanks for your message. I also thought this could be a problem, so I created VLAN 100 on SW2 and added it as tagged on port 1, but that didn't help either.

[KennethJack]

I really enjoyed this recipe and appreciated how simple the instructions were. The finished dish turned out delicious, flavorful, and satisfying, making it something I’ll definitely prepare again.
Visit

[Michaelllll]

I found the troubleshooting discussion helpful because it explains RSPAN clearly. The notes about VLAN tagging, trunk paths, and configuration details make diagnosing missing mirrored traffic much easier for beginners.
Visit

[NonalKe]

Hello, On SW2, you are mirroring port 4 to the remote VLAN, but make sure port 1 is actually connected…

Visit

[JackSmeth]

I love how this muffin recipe brings back the classic bakery-style texture. The tips about resting batter and choosing the right ingredients make the method especially useful for home bakers.Visit