sFlow not sampling on x670-48x
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-23-2015 03:47 PM
Any way to show the sflow config without showing all config?
Not getting samples. What am I missing here?
X670-48x
Image : ExtremeXOS version 15.6.1.4 v1561b4 by release-manager on Tue Sep 30 14:06:19 EDT 2014
BootROM : 2.0.1.7
Diagnostics : 6.3
....
configure sflow poll-interval 30
configure sflow collector 10.90.2.19 port 6343 vr "VR-Default"
configure sflow agent ipaddress 10.25.1.5
enable sflow
....
SFLOW Statistics
Received frames : 10341258740
Sampled Frames : 0
Transmitted Frames : 110895
Broadcast Frames : 33825358
Multicast Frames : 27781614
Packet Drops : 0
....
# sh sflow config
SFLOW Global Configuration
Global Status: enabled
Polling interval: 30
Sampling rate: 8192
Maximum cpu sample limit: 2000
SFLOW Configured Agent IP: 10.25.1.5 Operational Agent IP: 10.25.1.5
Collectors
Collector IP 10.90.2.19, Port 6343, VR "VR-Default"
SFLOW Port Configuration
Port Status Sample-rate Subsampling Sflow-type
Config / Actual factor Ingress / Egress
1 enabled 8192 / 8192 1
2 enabled 8192 / 8192 1
3 enabled 8192 / 8192 1
4 enabled 8192 / 8192 1
5 enabled 8192 / 8192 1
6 enabled 8192 / 8192 1
7 etc... all 48 ports
From GTAC KB, but did not change anything...
Resolution
Unconfigure sflow collector by typing the command:
Not getting samples. What am I missing here?
X670-48x
Image : ExtremeXOS version 15.6.1.4 v1561b4 by release-manager on Tue Sep 30 14:06:19 EDT 2014
BootROM : 2.0.1.7
Diagnostics : 6.3
....
configure sflow poll-interval 30
configure sflow collector 10.90.2.19 port 6343 vr "VR-Default"
configure sflow agent ipaddress 10.25.1.5
enable sflow
....
SFLOW Statistics
Received frames : 10341258740
Sampled Frames : 0
Transmitted Frames : 110895
Broadcast Frames : 33825358
Multicast Frames : 27781614
Packet Drops : 0
....
# sh sflow config
SFLOW Global Configuration
Global Status: enabled
Polling interval: 30
Sampling rate: 8192
Maximum cpu sample limit: 2000
SFLOW Configured Agent IP: 10.25.1.5 Operational Agent IP: 10.25.1.5
Collectors
Collector IP 10.90.2.19, Port 6343, VR "VR-Default"
SFLOW Port Configuration
Port Status Sample-rate Subsampling Sflow-type
Config / Actual factor Ingress / Egress
1 enabled 8192 / 8192 1
2 enabled 8192 / 8192 1
3 enabled 8192 / 8192 1
4 enabled 8192 / 8192 1
5 enabled 8192 / 8192 1
6 enabled 8192 / 8192 1
7 etc... all 48 ports
From GTAC KB, but did not change anything...
Resolution
Unconfigure sflow collector by typing the command:
- unconfigure sflow collector
- configure sflow collector port vr
7 REPLIES 7
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-23-2015 05:35 PM
Randy,
Was sflow previously working or is this a new setup? Please post the output of "show configuration etmon."
-Andrew
Was sflow previously working or is this a new setup? Please post the output of "show configuration etmon."
-Andrew
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-23-2015 05:08 PM
Thank you. Yes, it can ping.
Collector to switch and switch to collector, zero loss.
Collector to switch and switch to collector, zero loss.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-23-2015 03:59 PM
Randy,
The "show configuration etmon" command can be used to view the sflow configuration. Can the sflow collector (10.90.2.19) ping the switch at 10.25.1.5?
-Andrew
The "show configuration etmon" command can be used to view the sflow configuration. Can the sflow collector (10.90.2.19) ping the switch at 10.25.1.5?
-Andrew
