source specific ssh from EXOS-15.3.1.4

[Harkanwaljeet_S]

Hi All,
Is it possible to give source while doing ssh from Extreme switch to some external node.

Like we give source using from in traceroute or ping.

Thanks

[Rahmathullah__S]

Hi Harkanwaljeet,

Cli has no such option till EXOS 15.7 ,just verified.

Test logs :
=========

* Lab-sw # ssh2 12.0.1.28 ?
Execute the command
command to be executed on the remote host
* Lab-sw # ssh2 12.0.1.28
-------------- route-server.ip.att.net ---------------
--------- AT&T IP Services Route Monitor -----------

The information available through route-server.ip.att.net is offered
by AT&T's Internet engineering organization to the Internet community.

This router maintains eBGP peerings with customer-facing routers
throughout the AT&T IP Services Backbone:

IPv4: IPv6: City:
12.122.124.12 2001:1890:ff:ffff:12:122:124:12 Atlanta, GA
12.122.124.67 2001:1890:ff:ffff:12:122:124:67 Cambridge, MA
12.122.127.66 2001:1890:ff:ffff:12:122:127:66 Chicago, IL
12.122.124.138 2001:1890:ff:ffff:12:122:124:138 Dallas, TX
12.122.83.238 2001:1890:ff:ffff:12:122:83:238 Denver, CO
12.122.120.7 2001:1890:ff:ffff:12:122:120:7 Fort Lauderdale, FL
12.122.125.6 2001:1890:ff:ffff:12:122:125:6 Los Angeles, CA
12.122.125.44 2001:1890:ff:ffff:12:122:125:44 New York, NY
12.122.125.106 2001:1890:ff:ffff:12:122:125:106 Philadelphia, PA
12.122.125.132 2001:1890:ff:ffff:12:122:125:132 Phoenix, AZ
12.122.125.165 2001:1890:ff:ffff:12:122:125:165 San Diego, CA
12.122.126.232 2001:1890:ff:ffff:12:122:126:232 San Francisco, CA
12.122.125.224 2001:1890:ff:ffff:12:122:125:224 Seattle, WA
12.122.126.9 2001:1890:ff:ffff:12:122:126:9 St. Louis, MO
12.122.126.64 2001:1890:ff:ffff:12:122:126:64 Washington, DC

*** Please Note:
Ping and traceroute delay figures measured here are unreliable, due to the
high CPU load experienced when complicated show commands are running.

For questions about this route-server, send email to: jayb@att.com

*** Log in with username 'rviews', password 'rviews' ***

Password:

If you think this functinality is essential and want this to be supported in later versions, you may open a feature request and follow below link open a case with GTAC:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...

Thanks & Regards
Syed Nishath Rahmathullah

[Karthik_Mohando]

Hi,

I am afraid that is not an option.

here is the command syntax for SSH and there is not an option to mention a source IP.

ssh2 {cipher cipher} {mac mac} {port portnum} {compression [on | off]} {user
username} {username} [host | ipaddress] {remote command } {vr vr_name}