ExtremeSwitching (EXOS/Switch Engine) - Page 138 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Exos how to disable SSL3 on httpd management

On our quarterly internal vulnerability scans this keeps coming up on our EXOS switches. Example I’m looking at an X450G2 stack right now. It shows port 443 SSL v 3 is enabled. How can I disable SSL 3 and enforce TLS 1.2 only? Thanks! Oh switc...

Resolved! Is running RSTP and MSTP on the same set-up possible?

For a client set-up the vendor requires us to run RSTP on the internal network. The client wants a redundant connection to thier network with MSTP configured. Is it possible running both RSTP and MSTP on the same set-up?

Resolved! When putty is full screen and you backspace a long command, cursor jumps up a line

This is a question that I have in regards to a 4 year old post. Where are we with this? This was 4 years ago and still I see this issue.Using Putty to SSH to EXOS 5520 on 31.1.1.3.If you type something like sh port 1:1-48, you have to maximize your ...

Mirroring on X590 - V400. Troubles with 802.1BR (0x893F) encapsulation

Recently we replaced our Enterasys S4 with a couple of X590 and associated V400 edge switchesWe are now facing problems regarding mirroring the traffic of our VLANs and checking the results on our network analyzer where we also NEED to run tcpdumpHer...

Resolved! X435 "mode" button

Hello! What for “mode” button on front panel of X435?(there is no information in HW Install Guide). Also, am I understand right that 2,5Gbps speed for now unavailable for X435?(When it will be available and what optics have to used?) Thank you!

Top Kudoed Authors

User

Count

28

25

18

17

16

GTM-P2G8KFN