Stack X450 G2 switch

[Acevirgil_de_Oc]

Hello,

i want to know the part number of the stacking cable for stscking the 2 switch which is x450 g2 using the summitstack-v84.

Also i need the cli commands to create the stack for these two switches.

thanks.

[Acevirgil_de_Oc]

Thanks for your replies. Could you tell the exact part number of the SFP?

thanks

[Tomasz]

Exactly, any SFP 'insertible' that is supported by EXOS switch and firmware can be used for stacking.

Kind regards,
Tomasz

[Ronald_Dvorak]

You could find the information in the datasheet....

SUMMITSTACK-V ? Flexible Stacking Over 10 Gigabit Ethernet ExtremeXOS support s the SummitStack-V capabilit y using 2 of the native 10 GbE port s on the faceplate as stacking port s, enabling the use of standard cabling and optics technologies used for 10 GbE SFP+. SummitStack-V provides long-distance stacking connectivit y of up to 40 km while reducing the cable complexit y of implementing a stacking solution. SummitStack-V is compatible with X440 -G2, X450 -G2 and X460 -G2 switches with 10 Gb uplinks, as well as X480 , X670 , X670V, X670 -G2 and X770 switches. SummitStack-V enabled 10 GbE port s must be physically direct-connected with all switches running the same version of ExtremeXOS.

[Acevirgil_de_Oc]

Hi Tomasz,

Thank you for providing the helpful links. Another question, if I use the 10G ports on the front panel of the switch for stacking, what SFP modules and cables I need.

Thanks.