STP topology and configuration steps
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-02-2015 12:17 PM
I am new to this xtereme switch so am in a situation to configure stp. I have to setup STP in two X650-24x(SSns), so if anyone share me a topology to setup STP and configuration steps it will be a great helpful.
6 REPLIES 6
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-02-2015 04:25 PM
OK Voss. Thanks.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-02-2015 04:14 PM
Hi Dinesh,
Based on this information the article Brandon and I linked has everything you need. You will just need to fill in the VLAN and port information into the commands.
Based on this information the article Brandon and I linked has everything you need. You will just need to fill in the VLAN and port information into the commands.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-02-2015 04:08 PM
|------------|port4 port4 |-----------|
| switch1 |------------------| switch2|
| |------------------| |
|------------|port5 port5 |-----------|
Configuration for this setup
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-02-2015 04:06 PM
Hi Voss,
I am starting from the scratch, I am doing a lab setup configuring rstp in two switch. So I need the step by step configuration for the two switch with a simple topology diagram.
I am starting from the scratch, I am doing a lab setup configuring rstp in two switch. So I need the step by step configuration for the two switch with a simple topology diagram.
