Can i add two ip in the same vlan?
My Black Diamond (BD8810) have his management interface on my vlan50 with netmask 255.255.0.0 (/16) and i have one Cisco that have the same vlan50 with netmask 255.0.0.0 (/8) but for other network.
I want to move the uplink of this other network to my BD. But the users of the other network need to check my "switch" SNMP via vlan50/8.
So, if i can use two VLAN50 ip address, one with /16 and other with /8 mask i can start to remove the cisco switch.
I know that i will have another problem in the future. That is to block all my traffic from VLAN50/16 to go to VLAN50/8 port. We already do this with the cisco switch, by blocking mac addresses.
