Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-16-2019 09:22 AM
could you explain how to use virtualization to simulate exos switches as packet tracer.
thaks & regards
thaks & regards
Solved! Go to Solution.
1 ACCEPTED SOLUTION
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-16-2019 03:18 PM
Hi Nadir,
Take a look at the guides on the Virtual EXOS Github page:
https://github.com/extremenetworks/Virtual_EXOS/blob/master/README.md
Take a look at the guides on the Virtual EXOS Github page:
https://github.com/extremenetworks/Virtual_EXOS/blob/master/README.md
1 REPLY 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-16-2019 03:18 PM
Hi Nadir,
Take a look at the guides on the Virtual EXOS Github page:
https://github.com/extremenetworks/Virtual_EXOS/blob/master/README.md
Take a look at the guides on the Virtual EXOS Github page:
https://github.com/extremenetworks/Virtual_EXOS/blob/master/README.md
