Create Date: Aug 20 2013 1:47PM
Hi,
I try to set up config with vman/QinQ. I'd like move vlans 101,102,103..between summits 450a (xos 15.3) via vman1 with tag 804. I made loop between port 1 and 2 for test purpose on the same switch. Till now i can ping only vman1 interfaces.. what am i doing wrong ?
schema:
http://tnij.org/y7pn
my conf:
summit1:
enable jumbo-frame ports all
configure vman ethertype 0x8100
create vlan "vlan101"
configure vlan vlan101 tag 101
create vman "vman1"
configure vman vman1 tag 804
configure vlan vlan101 add ports 2 untagged
configure vman vman1 add ports 24 tagged
configure vman vman1 add ports 1 untagged
configure vlan vman1 ipaddress 192.168.1.11 255.255.255.0
configure vlan vlan101 ipaddress 192.168.0.11 255.255.255.0
enable dot1p examination inner-tag port 24
summit2
enable jumbo-frame ports all
configure vman ethertype 0x8100
create vlan "vlan101"
configure vlan vlan101 tag 101
create vman "vman1"
configure vman vman1 tag 804
configure vlan vlan101 add ports 2 untagged
configure vman vman1 add ports 24 tagged
configure vman vman1 add ports 1 untagged
configure vlan vman1 ipaddress 192.168.1.12 255.255.255.0
configure vlan vlan101 ipaddress 192.168.0.12 255.255.255.0
enable dot1p examination inner-tag port 24
thanks for help (from peter_peter)