ExtremeSwitching (EXOS/Switch Engine) - Page 23 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! System Type: EXOS or SwitchEngine ?

We noticed the show switch command on 2 different 5420s gave another System Type:System Type: 5420F-48P-4XE-EXOSSystem Type: 5420F-48P-4XE-SwitchEngineA few of the Switchengine ones give us a headache doing tftp image upload ( 31 -> 32 ) as...

Resolved! Clearing Ip-security dhcp-snooping violation list

I am not able to clear the violation entry. I've tried " clear ip-security dhcp-snooping entries vlan STUDENT_ITTSTAFF_849" and "clear ip-security dhcp-snooping entries STUDENT_ITTSTAFF_849 ports 5" Neither works. M_RM_4277_SW_TES_EX.dccc.edu....

Resolved! TDR or similar cable test diagnostics

Hello everyone, I would like to know if the summit series has any TDR functionalities or similiar failure detection features on copper cables. I know the summit series has a run diagnostics command, but, from what I've read, it only tests ASIC and p...

Resolved! Multicast not working from others vlans on extreme exos switch.

Dear team,We are having pim enable cisco router connected to switch in vlan 10 port and we enable pim in all vlans.Multicast stream working in vlan 10 but same is not working from others vlans eg vlan 20, vlan 30.We configured default route pointing ...

Resolved! Policy issue with 31.7.2.28-patch1-8?

x460-G2 stack version 31.7.2.28-patch1-8Tricky issue to describe: We have two internet connections and use a policy file to route traffic (based on layer 3 VLAN) to the connections for balancing. There are small twice daily updates to the policy fi...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN