X250e Configuration Fail

[JeremyClarkson]

Hi,

Anyone had recent Issues with X250e switches and all the modules are enabling themselves.
I have had this on 4 switches now.

Thanks

[JeremyClarkson]

Ah yea now i see, i hadn't noticed this before. I was so used to the new release.

Im sure though that version 12.x.x did work at some point with show config show only non-default configuration. It just seems strange that when we swapped them for new X440 they worked a treat.
edit: yes 12.1 thanks!

Since you are being helpfull does extreme have a basic troubleshooting guide to follow using EXOS i usually just use the show command to find anomalies.

show port utilization
show port configuration
show tech... etc.
any help would be great.

Thanks

[JeremyClarkson]

These are awesome! Thanks!

[Drew_C]

You might also like the Extreme Networks Deployment Jumpstart.

[Ryan_Mathews]

Sure.... a few of them

• GTAC Knowledge: https://gtacknowledge.extremenetworks.com
• The Hub: https://community.extremenetworks.com/extreme
• EXOS User Guide: http://documentation.extremenetworks.com/exos/EXOS_All/Preface/c_introduction.shtml
• Assisted Support: http://www.extremenetworks.com/support/contact

We publish articles every day to GTAC Knowledge based on issues the engineers resolve each day, from customer inquiries around the globe.

The KB is continually improving and is a perfect resource to help you troubleshoot. Its also mobile friendly, so great if you're on the go. Just pull up a browser on your mobile device and the responsive design kicks in.

We're always looking to write new content, so if you don't find what you're looking for...let us know!