Extreme Networks

aredwan · ‎09-03-2019

Hi all,

I have a X440-G2 switch with Dual 10GbE Upgrade License. i want the step by step configuration on the switch to enable the ports to 10G

Thank you

Ronald_Dvorak · ‎09-04-2019

Hi,
here a link to the XOS doumentation page.....

https://www.extremenetworks.com/support/documentation/extremexos-22-7/

... and the "enable license" page from the CLI guide...
https://documentation.extremenetworks.com/exos_commands_22.7/GUID-E03F00CA-D737-4B1B-895D-35DE9E848A...

-Ron

View solution in original post

RobertWilkinson · ‎02-24-2021

You need a license for each unit in a stack.

License is not shared between units/slots

Thanks @PeterK, you have confirmed what i thought. Thanks

PeterK · ‎02-24-2021

You need a license for each unit in a stack.

License is not shared between units/slots

RobertWilkinson · ‎02-24-2021

Does anyone know if this license moves between switches of the same model in a stack dynamically or would you have to have multiple Dual 10Gb Licenses for each switch in a stack?

aredwan · ‎09-04-2019

@Ronald Dvorak thank you for your reply. i have enabled the license successfully.

Extreme Networks

X440-G2 Dual 10GbE Upgrade License Configuration

X440-G2 Dual 10GbE Upgrade License Configuration