X440-G2 intervlan routing

[Alok_Shukla]

Could X440-G2 series supports Inter-VLAN routing? is this manageable switch?

[Alok_Shukla]

Does it Support VRRP?

[mischoe]

You just mean VLAN A and VLAN B to be routed on a X440-G2?
Yes, of course.

https://learn.extremenetworks.com/rs/641-VMV-602/images/ExtremeSwitching-X440-G2-DS.pdf
"The X440-G2 Series supports sophisticated and intelligent Layer 2 switching, as well as Layer 3 IPv4/IPv6 routing."

http://extrcdn.extremenetworks.com/wp-content/uploads/2014/04/ExtremeXOS_Feature_License_Requirement...
IPv4 unicast routing, including static routes: All platforms that support the Edge, AdvancedEdge, and Core licenses (see the following table).
Regards Micha

[Andre_Brits_Kan]

Hi Alok

Yes this is a fully managed switch.

You can assign IP's to each vlan and then enbale "IP forwarding" to allow routing between vlans.

For more advance routing like OSPF you can add the "Advance Edge" license.

Regards