x440 gbic issues

[Luis_Mendes]

Issues with gbic 10gb, the same gbic works on others model (x450-g2).

Slot-2 Stack.6 # debug hal show optic-info slot 2 port 28
Port 28
SFP or SFP+: SFP
Signal: not present
TX Fault: no
SFP/SFP+ Vendor: 7/ot
SFP/SFP+ Part Number: S+85DLC03D
SFP/SFP+ Serial Number: STTS5
SFP/SFP+ Manufacture Date: 07
SFP/SFP+ Type: SFP/SFP+
Connector: LC
GE Compliance: UNKNOWN (0x0)
Wavelength: 815

I upgrade the firmware for last version, but the same message, its occurs on 2 x440-g2 24t.

[Stachal]

X460-24t/x/p Alternate Stacking
Alternate Stack Port 1 = S1 (29)
Alternate Stack Port 2 = S2 (30)

[Stachal]

Have you configured them as alternate stacking ports?

Procedure

Confirm all switches are running same software version on the same partition. show version Confirm license level are the same on all switches. show license Configure stacking-support on all switches. Note, a reboot is required for the changes to take effect. configure stacking-support stack-port all selection alternate Connect all stacking cables. Type show stacking command and confirm all nodes are seen in stack topology. If not seen, type show stacking detail confirm all stack nodes are using the same stacking protocol (ie. standard or enhanced). Change stacking protocol on stack nodes if needed. configure stacking protocol enhanced /standard Type configure stacking easy-setup from the console of the switch we would like to take mastership role. Once rebooted issue show stacking and confirm all nodes take a stacking role.

[Luis_Mendes]

Yes, is this model, but i can use this port for stack without license. If i connect the same gbic(10g) in any other model, the gbic is recognized.. If i put the other gbic (1g), is recognized in the same port of x440-g2

[Wesley_Braunber]

I am having a similar issue with 440s. The same GBIC will work in a 440-P but not in a 440-T

[Stachal]

switch1# sho switch

SysName: switch1
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: **:**:**:**:**:**
System Type: X440-8t

These are the Models and port configurations for the X450

Summit X440-8t
8 x 10/100/1000BASE-T (RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-8p
8 x 10/100/1000BASE-T PoE-plus(RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-24t
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24tDC
2 x SummitStack
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-24p
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48tDC
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-48p
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24t-10G
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24p-10G
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x-10G
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t-10G
48 x 10/100/1000BASE-T (RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48p-10G
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connec