XOS 15.7.1.4 mvrp between BD8806 and SUMMIT X460-G2-48t-10GE4

[Antonio_Prado]

Hi,

just testing mvrp between

3 SUMMIT X460-G2-48t-10GE4 configured as a stack
and
1 BD8806 MSM-48c 10G8Xc

The Summit X stack is connected to BD8806 via a 10GE port.

On the BD8806:
create vlan test
configure test tag 500
configure vlan test add ports 6:2 tagged
configure mvrp tag 500 ports 6:2 registration normal
configure mvrp tag 500 ports 6:2 transmit on
configure mvrp vlan auto-creation on
configure mvrp vlan registration normal
enable mvrp ports 6:2
enable mvrpOn the SUMMIT X stack:
create vlan test
configure test tag 500
configure vlan test add ports 2:49 tagged
configure mvrp tag 500 ports 2:49 registration normal
configure mvrp tag 500 ports 2:49 transmit on
configure mvrp vlan auto-creation on
configure mvrp vlan registration normal
enable mvrp ports 2:49
enable mvrp
create vlan mvrptest
configure mvrptest tag 200
configure vlan mvrptest add ports 2:49 tagged
However, a show vlan on BD8806 doesn't show mvrptest.

Any hints would be appreciated.
Thank you
--
antonio

[Antonio_Prado]

anyway, on SUMIT X stack:

sh vlan
-----------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
-----------------------------------------------------------------------------------------------
Default 1 --------------------------------T---------------- ANY 1 /142 VR-Default
Mgmt 4095 172.31.150.102 /24 ----------------------------- ANY 1 /1 VR-Mgmt
mvrptest 200 ------------------------------------------------- ANY 1 /1 VR-Default
test 500 ------------------------------------------------- ANY 1 /1 VR-Default
-----------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (h) TRILL Enabled, (i) ISIS Enabled,
(I) Inter-Switch Connection VLAN for MLAG, (k) PTP Configured,
(l) MPLS Enabled, (L) Loopback Enabled, (m) IPmc Forwarding Enabled,
(M) Translation Member VLAN or Subscriber VLAN, (n) IP Multinetting Enabled,
(N) Network Login VLAN, (o) OSPF Enabled, (O) Flooding Disabled,
(p) PIM Enabled, (P) EAPS protected VLAN, (r) RIP Enabled,
(R) Sub-VLAN IP Range Configured, (s) Sub-VLAN, (S) Super-VLAN,
(t) Translation VLAN or Network VLAN, (T) Member of STP Domain,
(v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled, (Z) OpenFlow Enabled
Total number of VLAN(s) : 4

show vlan mvrptest
VLAN Interface with name mvrptest created by user
Admin State: Enabled Tagging: 802.1Q Tag 200
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Disabled
IPv4 MC Forwarding: Disabled
IPv6 Forwarding: Disabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
Ports: 1. (Number of active ports=1)
Tag: *2:49
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking

show mvrp tag 200
Port Applicant Applicant Registrar Registrar
State Control State Control
----- --------- --------- --------- ---------
2:49 VO On IN Fixed
-----------------------------------------------------------------
Applicant States:
AA : Anxious active, AN : Anxious new,
AO : Anxious observer, AP : Anxious passive,
LA : Leaving active, LO : Leaving observer,
QA : Quiet active, QO : Quiet observer,
QP : Quiet passive, VN : Very anxious new,
VO : Very anxious observer, VP : Very anxious passive
Registrar States:
IN : In - Registered, INR : In Refresh,
LV : Leaving - Timing out, MT : Empty - Not Registered
Applicant Control:
On : Transmit On, Off : Transmit off
Registrar Control:
Fixed : Statically added, Forbidden : Forbidden VLAN,
Normal : Dynamically added

thank you

--

antonio

[Antonio_Prado]

Try adding another active port on the 8806 to mvrptest (not 6:2)

Hi Chad,

my point is that there is not a mvrptest vlan on BD8806 yet, so I cannot add another active port.

thank you
--
antonio

[Stephane_Grosj1]

just fired up two VMs running EXOS 15.7.1p1-1, as soon as I do on each side on the correct port:

en mvrp port x
en mvrp

vlans are created.

[Antonio_Prado]

just tested mvrp between two SUMMIT X stacks as well (both with 15.7.1.4 v1571b4-patch1-2)

vlans don't propagate either

[Antonio_Prado]

upgraded also BD8806 to 15.7.1.4 v1571b4-patch1-2

vlans still don't propagate