XOS 15.7.1.4 mvrp between BD8806 and SUMMIT X460-G2-48t-10GE4

[Antonio_Prado]

Hi,

just testing mvrp between

3 SUMMIT X460-G2-48t-10GE4 configured as a stack
and
1 BD8806 MSM-48c 10G8Xc

The Summit X stack is connected to BD8806 via a 10GE port.

On the BD8806:
create vlan test
configure test tag 500
configure vlan test add ports 6:2 tagged
configure mvrp tag 500 ports 6:2 registration normal
configure mvrp tag 500 ports 6:2 transmit on
configure mvrp vlan auto-creation on
configure mvrp vlan registration normal
enable mvrp ports 6:2
enable mvrpOn the SUMMIT X stack:
create vlan test
configure test tag 500
configure vlan test add ports 2:49 tagged
configure mvrp tag 500 ports 2:49 registration normal
configure mvrp tag 500 ports 2:49 transmit on
configure mvrp vlan auto-creation on
configure mvrp vlan registration normal
enable mvrp ports 2:49
enable mvrp
create vlan mvrptest
configure mvrptest tag 200
configure vlan mvrptest add ports 2:49 tagged
However, a show vlan on BD8806 doesn't show mvrptest.

Any hints would be appreciated.
Thank you
--
antonio

[Stephane_Grosj1]

correct.
I have double-checked that internally.

[Antonio_Prado]

with a port in it (even disabled) other than mvrp transmitting ports.
is it correct?

thank you
--
antonio

[dflouret]

Antonio,

Are the two switches connected through the correct ports?
show edp port all should show you through which ports the switches see each other.

[Antonio_Prado]

no, it's not

[Stephane_Grosj1]

is that port a LAG ?