XOS show vlan portinfo

[Thomas_J_Egger]

Hi all,

are there any plans to implement the command into XOS?

_ToM

[Ronald_Dvorak]

The difference is that XOS "show VLAN X" reports all ports in that VLAN.
"show vlan portinfo" does the opposite it shows all VLANs on all ports.
That would mean on a switch with 100 VLANs I'd need to do 100x XOS show vlan x to get the same result as with a single show vlan portinfo command.

Ron

[Paul_Russo]

Hey Ron. Just doing a show on the VLAN gives you that information. For example if you have a VLAN called extreme doing a show extreme will list the ports that are either tagged or untagged in that VLAN. Let me know if you need more questions. P

[Ronald_Dvorak]

Paul,

the output of the command gives an overview about the VLANs untagged/tagged that are configured per port in one simple view which is great for troubleshooting.

So would be great if we'd get that also in XOS.

Here an example.....

D2_desk(su)->show vlan portinfo
Port VLAN Ingress Egress Filter Vlan
-----------------------------------------------------------------
ge.1.1 100 N untagged: 100
ge.1.2 100 N untagged: 100
ge.1.3 100 N untagged: 100
ge.1.4 100 N untagged: 100
ge.1.5 100 N untagged: 100
ge.1.6 100 N untagged: 100
ge.1.7 100 N untagged: 100
ge.1.8 100 N untagged: 100
ge.1.9 999 N untagged: 999
ge.1.10 999 N untagged: 999
ge.1.11 999 N untagged: 999
ge.1.12 1 N untagged: 1 tagged: 100
lag.0.1 1 N untagged: 1
lag.0.2 1 N untagged: 1
lag.0.3 1 N untagged: 1
lag.0.4 1 N untagged: 1
lag.0.5 1 N untagged: 1
lag.0.6 1 N untagged: 1
D2_desk(su)->

Thanks,
Ron

[Paul_Russo]

Good morning Tom. I do not believe that is on the roadmap. Can you tell me what data you are looking for? P