200 series switch not passing any traffic

[TTURedRaider]

Hello everyone, I have a C210 (210-48t-GE4) switch that is not passing any traffic.  It is not seeing any MAC addresses learned on any of the access ports.  I ran into this article

https://extremeportal.force.com/ExtrArticleDetail?an=000078060

But the command set is not available on this switch (code version 1.2.6.9).,  I have opened a TAC case but I’m not gaining any traction.

Suggestions are more than welcomed.  Thanks

[StephenW]

Did it ever pass traffic?  Have you tried defaulting it?

This is a good article for all things 200 series. 

https://extremeportal.force.com/ExtrArticleDetail?an=000080357