Any hint how to configure Cisco WCCP-Feature within K-Series

[Tom_Egger]

Dear Community,

i recieved a request i would like to answer with a enterasys K6, the only point i found is the request of beeing capable of doing WCCP redirect do communicate to an ironport.

Is this doable with K6?

Thanks,

_ToM

[Tamera_Rousseau]

Hi Tom, I would suggest that if this is a feature you would like to see in the k-series, please feel free to suggest this as a product "idea" in the community and we can get this into product management's hands.

[Tom_Egger]

Hi Tyler,

TWCB is fine, but unfortunately a S-Series-Feture. SSA has some "issues" with 10G-Density, S-140 is more expensive than a Cat4500E. Maybe I´l try with some stacked Summits:

entry redirect {if {protocol tcp/udp;destination-port 80;} then {redirect x.x.x.x/y;}}

_ToM

[TylerMarcotte]

Hi Tom,

I'm not super familiar with Cisco's WCCP, but I think that the TWCB feature is similar. Here's a link to the feature guide if it helps.

https://extranet.enterasys.com/downloads/Pages/dms.ashx?download=823da961-baa5-49d9-9546-89e456a64c9...

Let me know if that helps. If needed I can try to ping a few others to get some more info.

-Tyler