Can L2TPv3 be configured on Extreme Networks X460 switches?

[Przemek_Dymitro]

Hey experts,

I would like to implement L2TPv3 feature on my X460-G2 switches, to extend my L2 network across the sites. Is it possible to configure it? If yes, then what is the CLI commands and from which SW version this feature is supported?

[Przemek_Dymitro]

Hi Brandon,

Thanks for the reply. The problem is, that I was looking for L2 stretching solution, that would not have to increase the size of MTU, which VXLAN is apparently doing.

[BrandonC]

Hi Przemek,

Unfortunately, EXOS does not support L2TPv3.

However, VXLAN is supported starting in 21.1, so that may be helpful in your situation.

-Brandon