cancel
Showing results for 
Search instead for 
Did you mean: 

Can we enable stack on already been configured X440-g2 switches or does we have required default setting for enabling stack?

Can we enable stack on already been configured X440-g2 switches or does we have required default setting for enabling stack?

Alok_Shukla
New Contributor III
Can we enable stack on already been configured X440-g2 switches or does we have required default setting for enabling stack?
3 REPLIES 3

Dorian_Perry
Contributor
Hi Alok,

This could help. It is a script to convert the standalone configuration to stacking.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Convert-Non-Stacking-configuration-...

Vellachery__Sum
Contributor
Alok,

Please follow the below-mentioned KB Article:- How to Add a Node to a SummitStack

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-add-a-node-to-a-stack

renevanegdom
New Contributor
If you enable stacking on the switches en reset the stack. The configuration is default.
GTM-P2G8KFN