This is the configuration of my S-Series, however my collector receives no information, I do not understand what the problem is.
I monitor the collector with "tcpdump port 2203" but nothing is received, however if from the S-Series run telnet to 2203 if you get it, so I discard it a problem iptables.
Any ideas?
My configuration:
# Chassis Firmware Revision: 08.11.05.0007!
# netflow
set netflow export-interval 1
set netflow export-destination 192.168.8.82 2203
set netflow export-data enable vlan
set netflow port lag.0.121 enable both
set netflow template refresh-rate 600 timeout 1
set netflow cache enable
!
end
CPD1(su)->show netflow
Cache Status: enabled
Export Version: 5
Export Interval: 1 (min)
Number of Entries: 6291455
Inactive Timer: 40 (sec)
Template Refresh-rate: 600 (packets)
Template Timeout: 1 (min)
Destination IP UDP Port
--------------------------------------- --------
10.0.0.10 2203
Export Rate Max Export Rate
Slot (records per second) (records per second)
-------------------------------------------------------
2 10000 20000
3 10000 20000
Enabled Ports Both Ingress and Egress:
-------------------------------------
lag.0.121
Disabled Ports:
-----------------
lag.0.1-120,122-127
ge.2.1-48,101-112,201-212
ge.3.1-48,101-112,201-212
Export Statistics:
------------------------------------
Network Packets Sampled: 285574261
Exported Packets: 0
Exported Records: 0
Export Packets Failed: 0
Export Records Dropped: 0
