ExtremeSwitching (Other) - Page 13 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

ERROR: copy failed (code:0x9) on firmware copy

Hello.What does the following mean?I can see the data being transferred from XMC using tcpdump. 5520-24X-VOSS:1#copy 192.168.99.96:/firmware/images/5520.8.6.1.1.voss /intflash/5520.8.6.1.1.voss Device /intflash has 961110016 bytes of free ...

Reset X670V-48t to factory default...

I have several X670V-48t that I received from another department, so I don't know the password; I'd prefer to reset back to factory default. The "config none" reset method won't work...Anyone know how? At the:BootRom > helpBoot and Load--------------...

X440-G2 Switch connect with router

Hello guysI have configured a extreme Switch model x440-g2 I have configured VLAN with Tage and ip address but can not access the switch from Router.I wonder if it is some thing to do with VR.Thanks Mohammad

Resolved! Can't add a tagged port on a stacked secondary switch?

I have two x250e switches stacked together. I can successfully add untagged vlans to ports on the first switch without an issue. But if I try to add an untagged vlan to a port on the 2nd switch (which was added to the first) then I get the below erro...

Extreme ACLs in MLPS Network

Hi All,I'm new to the Extreme Switch environment and I'm looking for some guidance on applying ACLs to a large deployment of networks.I'm working on a project that is expanding a flat network into 48 VLANs across 6 locations. (8 VLANs per location)....

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN