cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme 210

Extreme 210

Vitaliy
New Contributor II

I can't configure SNMP, tried all sorts of options, downloaded MIB, as a result, a complete zero. The switchboard does not provide any information. What could be the reason?

 

Community-String     Community-Access View Name        IP Address
-------------------- ---------------- ---------------- ----------------
public               Read Only        public           10.10.10.12


Community-String     Group Name                     IP Address
-------------------- ------------------------------ ----------------
public               public                         All

Traps are enabled.
Authentication trap is enabled.


Version 1,2 notifications
Target Address   Type    Community            Version UDP    Filter   TO Retries
                                                      Port   name     Sec
---------------- ------- -------------------- ------- ------ -------- --- ------
10.10.10.12     Trap    public               2       162
10.10.3.12       Inform  public               2       162             15  3


Version 3 notifications
Target Address   Type    Username           Security UDP    Filter   TO  Retries
                                            Level    Port   name     Sec
---------------- ------- ------------------ -------- ------ -------- --- -------

1 ACCEPTED SOLUTION

Vitaliy
New Contributor II

Suddenly someone will need it, so that they don't suffer like me.

 

(Extreme 210) >en

(Extreme 210) #configure

(Extreme 210) (Config)#snmp-server group "public" v2 read "Default" write "Default"

(Extreme 210) (Config)#snmp-server community-group "public" "public"

(Extreme 210) (Config)#write memory confirm
 

View solution in original post

4 REPLIES 4

Vitaliy
New Contributor II

Suddenly someone will need it, so that they don't suffer like me.

 

(Extreme 210) >en

(Extreme 210) #configure

(Extreme 210) (Config)#snmp-server group "public" v2 read "Default" write "Default"

(Extreme 210) (Config)#snmp-server community-group "public" "public"

(Extreme 210) (Config)#write memory confirm
 

Vitaliy
New Contributor II

Someone can show in a working example how to configure Extreme 210 snmp, because I can't do anything I set up different devices from different manufacturers, but this switch was too much for me.

Vitaliy
New Contributor II

I didn't ask you to poke me in the manual, I saw it, I have it before my eyes, better tell me what I'm doing wrong?

SamPirok
Community Manager Community Manager
Community Manager

Hello, this guide has an SNMP set up section that should help you get SNMP up and running: https://documentation.extremenetworks.com/200_commands/GUID-C7B5110C-BC4C-4222-BFA1-E716B7F3EFDC.sht...

GTM-P2G8KFN