Customer has a 220 series 12 port and 48 port and is trying to connect the 2 via SFP ports on 1/0/13 on the 12, and 1/0/49 on the 48, but still have a link state down. This is a flat network, only the default VLAN is there.
SFP modules are compatible (10301; 10GBase-SR). Can verify the SFPs are there on both switches.
Firmware is up to date to 1.2.3.5.
There is no serviceport address, but a network address is configured. Both ports are configured as a trunk with the allowed vlan 1. I tried setting the ports to 10G full-duplex, now currently have the speed set to auto with auto-negotiation on both ports. Also went ahead with the shut/ no shut on ports and still cannot get anything.
