cancel
Showing results for 
Search instead for 
Did you mean: 

failed k-10 blade

failed k-10 blade

Ako_Singletary
New Contributor II
I have a K-12 switch and one of the blades stopped working. So I replaced the blade and the status light did not come on, and none of the ports on that blade work. What could be the problem?

4 REPLIES 4

Doug
Extreme Employee
Good news, keep us posted if things change. Typically that logging buffer is a great place to go on the K to see why the slot is failing. You can paste the error message into our GTAC Knowledge Site. If we know about the error, it should give you recommendations on next steps.
Doug Hyde
Director, Technical Support / Extreme Networks

Ako_Singletary
New Contributor II
Nope, it seemed to have cleared-out working as it should now. Thanks!

Doug
Extreme Employee
Ako,

Just following up. Are you still having issues with the K?
Doug Hyde
Director, Technical Support / Extreme Networks

Doug
Extreme Employee
Hello, Is the K series showing messages in the logging buffer for this slot?
Doug Hyde
Director, Technical Support / Extreme Networks
GTM-P2G8KFN