aspenBCMUnitAssignLearnSTG(2:23,182) - Unit 0 is not initialized for STG LEARNing mode!!! 13-05-20sgs.portLinkStateDown> Port 2:23 link down

[Rod_Robertson]

aspenBCMUnitAssignLearnSTG(2:23,182) - Unit 0 is not initialized for STG LEARNing mode!!! 13-05-2015 11:05:40 Port 2:23 link down

Can someone advise what this error actually means , connected to this port is a printer

[Prashanth_KG]

Rod,

Refer this URL for more details on the fan function pointer error.
http://gtacknowledge.extremenetworks.com/articles/Solution/Warn-HAL-Sys-Warning-Slot-1-Fan-Function-...

A reboot could get rid of the error. Also observe if the STP related error pops up after reboot.
If you need further investigation, GTAC case could be helpful.

Thanks

[Rod_Robertson]

Thanks for your help ... Yep its over to GTAC ...

[Prashanth_KG]

Rod,

Thanks for the reply.
the fan function pointer errors appear cosmetic during bootup based on the internal research.

I would suggest opening a GTAC case if not already done as we need to look up multiple issues here.

Thanks

[Rod_Robertson]

In this case it specific ports where some printers are attached..well thise are the devices showing the problems..

latest errors from this switch ..

13-05-2015 14:53:55 Fan Function pointer is not initialized. Caller: 0x4649ac Parm1: 0x5 Parm2: 0x7fff748013-05-2015 14:53:55 Fan Function pointer is not initialized. Caller: 0x4648ec Parm1: 0x5 Parm2: 0x7fff73f0
13-05-2015 14:49:17 aspenBCMUnitAssignLearnSTG(2:8,180) - Unit 0 is not initialized for STG LEARNing mode!!!
13-05-2015 14:49:17 aspenBCMUnitAssignLearnSTG(2:8,180) - Unit 0 is not initialized for STG LEARNing mode!!!
13-05-2015 14:49:16 Port 2:8 link UP at speed 100 Mbps and full-duplex
13-05-2015 14:49:14 aspenBCMUnitAssignLearnSTG(2:8,180) - Unit 0 is not initialized for STG LEARNing mode!!!
13-05-2015 14:49:14 Port 2:8 link down
13-05-2015 14:48:55 Fan Function pointer is not initialized. Caller: 0x4649ac Parm1: 0x5 Parm2: 0x7fff7480
13-05-2015 14:48:55 Fan Function pointer is not initialized. Caller: 0x4648ec Parm1: 0x5 Parm2: 0x7fff73f0
13-05-2015 14:45:47 Port 5:2 link UP at speed 100 Mbps and full-duplex
13-05-2015 14:45:44 Port 5:2 link down
13-05-2015 14:43:55 Fan Function pointer is not initialized. Caller: 0x4649ac Parm1: 0x5 Parm2: 0x7fff7480
13-05-2015 14:43:55 Fan Function pointer is not initialized. Caller: 0x4648ec Parm1: 0x5 Parm2: 0x7fff73f0