cancel
Showing results for 
Search instead for 
Did you mean: 

GBIC Ports

GBIC Ports

Steve_Artman
New Contributor
Rookie Enterasys user here. We have a stack of 4 C5G124-48P2's. A problem yesterday caused the stack to reboot. When it came back up, regular ethernet ports 45-48 stopped working 3 slaves, but the GBIC ports 45-48 are still working. We use a mix of GBIC and the ethernet ports on that end of the switches. As a temporary work around, I moved the ethernet stuff to lower numbered ports, but I'd like to get it put back.

Any suggestions?
5 REPLIES 5

Jason_Parker
Contributor
I tested this with a later image in the lab on the C5 and I can retest this with your release

Daniel_Coughlin
Extreme Employee
I would suggest collecting the show support and current.log from the stack.
How to Retrieve Current.log File From a Securestack via TFTP
How to collect the Show Support from a SecureStack

Daniel_Coughlin
Extreme Employee
Hi Steve,

If that is the case I suggest you open a ticket so we can look through the logs and see what happened.

Steve_Artman
New Contributor
Thanks for the quick reply.

The combo ports behavior is what I expected from the 3Com switches at my last job, but it seems like they're all dead. Of the 12 ports (4 ports on 3 switches) we're only using 2 SPF ports. If I plug anything into the unused ethernet ports, nothing happens. No lights, no link.

We're currently on firmware 6.81.05.0003

Thanks
GTM-P2G8KFN