How can I merge multiple devices management in one?

[gbs]

How can I merge multiple devices management in one?

I want that non stackable switch works like as if they were stacked just for management, is this possible?

I have some x430 connected to one x460. All i want is to see all ports and configure all vlans in the same way that i can do in stacked switchs.

X460-48p.8 # show edp ports all
Port Neighbor Neighbor-ID Remote Age Num
Port Vlans
=============================================================================
3 X430-24t 00:00:00:04:96:xx:xx:xx 1:23 39 6
4 X430-24t 00:00:00:04:96:xx:xx:xx 1:23 53 6
5 X430-24t 00:00:00:04:96:xx:xx:xx 1:23 24 6
6 X430-24t 00:00:00:04:96:xx:xx:xx 1:23 55 6
Thanks

[gbs]

Henrique, thanks for the advise about Management Center. I'm using syncronizeds telnet access to apply common config.

[Henrique]

Hi Gerson, I'm glad to help. Thanks for your feedback!

[Henrique]

Hi Gerson, if you are using standalone switches, their ports/vlans have to be configured in each switch individually even for management purpose.

As an alternative you might be able to use Extreme Management Center (formerly Netsight) or create a python script to apply common configuration to multiple devices.

[BrandonC]

Unfortunately this is not possible. The best solution for simplified management may be to use an NMS like Netsight to manage all of these switches.

-Brandon