i have 2 switches both with no iOS and they repeat
The system is coming up, please wait...Read board ID of 0x80 from addr 0x23
Read extended model ID of 0x19 from addr 0x22
Matched board/model ID to platform index 6
Read board ID of 0x80 from addr 0x23
Read extended model ID of 0x19 from addr 0x22
Matched board/model ID to platform index 6
Failed to Identify the drive
Checking system RAM - press any key to stop test
Checking memory address: 00100000
System RAM test using Default POST RAM Test succeeded.
Press escape within 4 seconds to enter boot interface.
Booting "Fabric Operating System" image.
Resetting ATA controller.
ATA controller reset failed.
Read map file failedd
Booting "Fabric Operating System" image.
Resetting ATA controller.
Also i am unable to find a iOS. I dont not have a Brocade or HP service plan so i know they wont be of any help at all. i need a step by step procedure on how to install an IOS
