cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure 1G BaseT SPF in Summit X670-G2

How to configure 1G BaseT SPF in Summit X670-G2

John_Dave_Thurl
New Contributor
Hi im using a X670G2-48x-4q with the firmware v15.7.1.4

I want to use some 10/100/1000 BaseT SPF but they wont show link.

I have configured the with the command
"
configure ports x auto on speed 1000 duplex full
"

can you help me out is there somthing missing in the configuration?

10 REPLIES 10

John_Dave_Thurl
New Contributor
it's an electric sfp for regular RJ-45 copper cable...
so i cant missmatch RX and TX 😉

@collins: I'm not using the certified GBICs but compatible ones...maybe thats the fault.
But my reseller promised they would work...I'll order a pair of certified ones and try it out.

McClane
Extreme Employee
FYI... I have an Extreme certified 10/100/1000 BASE-T mini GBIC and it works fine on my G2 running 15.7.1.4 with the default switch config... which is 'configure ports 24 auto off speed 10000 duplex full' and oddly enough the link comes up fine at 1G.

Jeremy_Thornton
New Contributor II
John, is it electric or optic? I was thinking electric since you hooked a notebook to it...

Bill_Stritzinge
Extreme Employee
Hi,

I would suspect that you are experiencing the same issue that we had with SX optics with the 15.7 firmware. Can you downgrade to 16.3.1 and give it a shot? There was an issue in 15.7 where 1Gig optics on G2 would not give a link and go active. Let me know...

Bill
GTM-P2G8KFN