We have an S8 with two ST1206-0848-F6 cards and firmware 8.31.3.2
We are trying to setup antispoof but the binding table is always empty.
We have DHCP servers on ports lag.0.4-7. The commands:
set antispoof dhcp-snooping enable lag.0.4-7
set antispoof dhcp-snooping port-mode trusted lag.0.4-7
set antispoof enable
set antispoof notifications interval 30
do not populate the binding table with any entries.
show antispoof binding
No entries found.
What am I doing wrong?
Thank you
