Is there any tool or Command for comparing the VLANs from Two Switches?

[Boopathy_Chandr]

I have Ten Switches but each having 200 or 300 VLAN's.
My Question is, What is the right way to compare two Switches (VLAN) ?
Is there any tools or commands for comparing those VLAN's ????
Because I want to check all the Switches and want to configure the Missing VLAN's..!!
Kindly help me out in this...!!!!!

Note : All are Extreme X450e-48p Switches.

[Jeremy_Gibbs]

Or, just paste a complete config of all your vlans on each switch... then they will be all up to date.

[Boopathy_Chandr]

Yes, I too agree with you..!!
Thanks for your Response.!!!

Regards,
Boopathy Chandrasekar

[Vellachery__Sum]

Yes, it would affect the switches and it is not recommended to do it in a production environment.
First Edit the configurations as you wish and then paste it on the switches.

Regards,
Sumeesh

[Boopathy_Chandr]

In my case , All the switches are live (Production)
Are you sure, it will not affect the live Switch ????
I don't want to take Risk by applying all the commands on Live Switches..!!!!! 😞
Am I right ????