02-17-2021 09:24 AM
PoE is getting off after switch restarts , i have to manually turn on PoE on all ports, how to fix this
Solved! Go to Solution.
02-17-2021 02:11 PM
Hello,
please check that KB, too:
https://extremeportal.force.com/ExtrArticleDetail?an=000057349&q=xos%20poe%20turned%20off%20reboot
https://extremeportal.force.com/ExtrArticleDetail?an=000082858&q=poe%20isw
https://extremeportal.force.com/ExtrArticleDetail?an=000079354&q=poe%20isw
Did you check the log?
07-16-2025 02:51 AM
I have a problem with the ISW switches .When I configure an uplink port (port 1/8) in switchport mode trunk.I perform a backup with the command copy running startup. Then i perform a cold reboot .After the cold reboot , the uplink port is in access mode and the switchport mode trunk has disappeared from my configuration.I have installed the latest software V01.01.06.0001.dat
07-16-2025 04:22 AM
It's a software bug in version V01.01.06.0001.dat. I have downgrade the switch in version V01.01.05.0004.dat and the problem has disappeared.
02-17-2021 02:11 PM
Hello,
please check that KB, too:
https://extremeportal.force.com/ExtrArticleDetail?an=000057349&q=xos%20poe%20turned%20off%20reboot
https://extremeportal.force.com/ExtrArticleDetail?an=000082858&q=poe%20isw
https://extremeportal.force.com/ExtrArticleDetail?an=000079354&q=poe%20isw
Did you check the log?
02-17-2021 12:01 PM
Hello,
do you remember to save the running-config as the startup-config? Also check if you are running the latest firmware, since there have been some changes regarding PoE.