code:Hello good Morning,
I have a 48-port C3-Series Extreme Switch with 7 vlan's configured and the switch-enabled DHCP on some of them.
What I need would be a PXE boot to point to another Vlan, in the vlan default home, because I use a Windows Server with PXE enabled, but it does not have the DHCP function installed.
The ip of Vlan is 10.1.2.1 and 10.1.3.1 and I need to point to boot via pxe for ip: 10.1.0.9
If I use bootrelay meets my need, or do I need to disable the switch's dhcp and use it for a server on the same network?
This is the DHCP configuration of one of the vlans:
set dhcp bootp enable
set dhcp pool technique
set dhcp pool technical dns-server 10.1.0.2
set dhcp pool technical default-router 10.1.2.1
set dhcp pool tecnica network 10.1.2.0 255.255.255.0
set dhcp pool tecnica domain-name tecnico.local
