Dear all, I configured a B3 Enterasys switch (with the latest firmware on it B3-661100008) for MAC authentication purpose via a RADIUS Server (Ip address 100.1.3.59). I used the following commands: set radius server 1 100.1.3.59 1812 Password realm network-access set radius enable set macauthentication enable set macauthentication password Password set macauthentication port enable *.*.* set macauthentication portquietperiod 60 *.*.* The problem is that the switch is not sending any authentication request to Radius Server, tested with tcpdump and wireshark, even if ping the connectivity between them is ok. I used the same configuration on a C5 Enterasys switch and it works! Somebody could kindly help me? Thank you in advance Best Regards Claudio Minnetti
