stacking 460g2 with vim-2x

[Dean_Ferraro]

I am trying to stack two 460g2 via VIM-2x modules with exos 16.1.3, and have cabled them the VIM modules from S2 to S1 and S2 to S1 and they show link lights but do not form a stack. This works fine on the front panel ports but not the VIM. I noticed I had to run alternate as native mode is not supported on this module. Any thoughts on what I am missing? Thanks

[Dean_Ferraro]

Just found this same link as well. I will be trying to set back to Native and advise. Thanks

[Edward_Tsui]

Hi Dean,

FYI, you may find useful configuration and troubleshooting guide here:

https://gtacknowledge.extremenetworks.com/articles/How_To/Getting-started-with-Summit-Stacking/

[Dean_Ferraro]

Thanks. I will give native a shot on Monday, but am fairly confident I read these cards do not support native stacking. Also I can see the ports available for stacking as suggested, but couldn't find much documentation on the command syntax to change them. Any suggestions?

[Balaji_Kumar_Na]

We will use VIM-2x card for stacking when we have 1G switch for stacking. You can do show stacking-support to see which ports can be used for stacking.