I am trying to direct my XMC alerts from Extreme Captive Portal to Office365 instead of Exchange, but it does not seem to work as I cannot set up to authenticate the user. Has anyone had any success with and can advise me how best to proceed?
Error Message on the switch
I am receiving several messages like this in my logs on Summit 460G2 running 16.2.4.5-patch1-5. The GTAC whitepaper suggest I should clear the snooping table for the entry however does not indicate how to accomplish this....
Running 16.2.4.5 I joined a 670 to an X8 core and while the 670 learned all the ospf routes for the rest of my environment the X8 did not learn the new routes (vlans) from the 670 or redistribute, any thoughts?
Is there a recommeded maintenance guide for Netsight 8.1.4.40. I am looking to clear some of my log files as they have exceeded their limits. Also if there is any standard maintenance that I should be performing regularly.
We recently upgraded XMC to 8.1.4.40 and it appears that our Fingerprints are no longer updating. I have checked the Operations Tab at the bottom of the window and it shows 100% failure. I see that either a FPM License or an Analytics Appliance must ...
Ok I was hoping this would be something simple. I will need to put this on hold a bit and circle back when time permits or this becomes an urgent priority. Thank you again for all your help. Dean
I receive alerts as indicated, however, the validation codes are still not being sent.. With this I believe all the SMTP settings are correct only the verification codes aren't delivered which makes me believe they are controlled elsewhere. Thanks yo...
Ryan,
Very good this took care of a big part of the issue I was experiencing with my ALerts, however, I still have one more hurdle to overcome. Do you know where I can find any similar settings within the Captive Portal? We had setup a vendor portal...
