Hi,
you're right,
X450e-48p.1 # show stacking-support
Stack Available Ports
Port Native Alternate Configured Current
----- ----------------- ---------- ----------
1 Yes 49 * Alternate Alternate
2 Yes * 50 Native Native
stacking-support: Disabled N/A but
X450e-48p.1 # enable stacking-support
^
%% Invalid input detected at '^' marker. I've tried this before and after some searching I've found somewhere in the knowledgebase, that this is normal on switches with integrated stacking ports (
https://gtacknowledge.extremenetworks.com/articles/Q_A/enable-stacking-support-command-does-not-exis...)........ But this was also my first approach.
Hope you can help me further.
Micha