We have some Summit X450e equipped with XGM2-2BT Cards. Noe we want to reorganise the stack (4Switches) and distribute it over two rooms (2+2). So I'll try to use one of the 10GBase T Ports for Stacking....
I configured the according Port with
configure stacking-support stack-ports 1 selection alternate or on the other Switch of the pair with
configure stacking-support stack-ports 2 selection alternateI connected the alternate ports with a short cat6 cable, but with show stacking i only see the two switches connected with the normal stacking cable.
I've also reset 4 of our switches to factory default (unconfigure switch all) to checkif it is working when I rebuild the stack from scratch, but no success......
10G Ports, not configured as Stack port are working.
Do I miss something? Where is the error? Do I miss something
Perhaps someone can help me, to get this running.
Regards Micha