Switchs B and A series default trap

[Esteban]

Hi, a question about switch B and A series: when trap generation is enabled in the switch, how can i know the list of trap generated by default ? I cannot find this list in the manuals.

[Jason3]

This will depend on the logging levels set such as
set logging default severity1-8
Server default severity level 1=emergency to 8=debug

set logging applications (Mnemonic)) level X(6 is the default)
To get a list of the commands (sh logging application <>)

[Esteban]

Hi Jason, thanks for your reply..
I have already configured the switch to send trap and i can see in Netsight the trap come from the switch when ,for example, i plug-unplug a link or a ethernet port. But my question is another: What are trap generated "by default" and what no? How can i know if, for example, trap for a "fan failure" or "topology change" is generated by the switch if the event occour?

[Jason_Parker]

The second show config should have been snmp so you could verify if informs or traps are set.

[Jason_Parker]

Lets start by stating You cannot get traps if nothing is set (show config logging) or show conf logging (TRAPS OR INFORMS) We suggest opening a case with GTAC and we can guide you through the steps