WS-C2960X-24TS-L
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-21-2015 05:05 AM
Recently I bought the Cisco 2960-X switch WS-C2960X-24TS-L. It always automatic shutdowns when connecting to the computer, why?
4 REPLIES 4
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-21-2015 11:37 AM
Hi Merry,
This is a question that might be better directed to the actual Cisco support forum: https://supportforums.cisco.com/
This is a question that might be better directed to the actual Cisco support forum: https://supportforums.cisco.com/
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-21-2015 05:36 AM
nevertheless how you connect the PC, using copper or console cable, the right or the wrong console cable, i do think that the switch shouldn't shutdown....
if you're able to use the console, then send us the output when it reboots...
if you're able to use the console, then send us the output when it reboots...
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-21-2015 05:28 AM
It shouldn't act this way. How you connecting computer ? Keep in mind that extreme console cable is quite different than cisco ones. Use blue console cable, connect via com and look what happends.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-21-2015 05:14 AM
the way your switch is behaving is quite strange. therefore, i'll recommend a Firmware upgrade to the actual version. might help...
cheers
Gradelain
cheers
Gradelain
