ExtremeSwitching (VSP/Fabric Engine) - Page 109 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

QoS on ERS 4900 HW:03

We have got complaints from users about low network performance. The users are behind newly deployed ERS 4900 switches with 10Gbps uplinks. After some investigation we have addressed it as a QoS issue. When queue-set other than 1 is set it is not ...

XMC TCL script results with 'javax.script.ScriptException: * Script Error * null'

Hello, Couple of days ago I was trying to play with XMC scripting capabilities to combine it with VOSS device (VSP4K). To start with something simple to check if it works, I did a script to enable a port. CLI script type with exact port specified wo...

Quality of service

Case DescriptionWe have 100 Mbps MPLS connection and we want to prioritize traffic for two VLAN. Example: (a) VLAN-10 should be 10Mbps for Audio and video (b) VLAN-20 should be 80 Mbps.

Q: where can I set up email notification for [urgent] field notices and new software releases?

Q: where can I set up email notification for [urgent] field notices and new software releases?

FN-2018-421, ERS Flash Failure due to Excessive Writes

Extreme Networks has recently discovered an issue on certain versions of ERS 4800, ERS 4900, and ERS 5900 software which can result in an excessive write frequency to the NVR Flash partitions storing the configuration data on non-base units in stack ...

Top Kudoed Authors

User

Count

32

18

16

15

7

GTM-P2G8KFN