Unsuccessfully cannot get an adjacency in GNS3 VOSS 7.0 using Fabric Extend over IP Tunnel using loopbacks. Can anyone advise where I’m going wrong here? I think my logic is correct, but maybe the config is not? I need to implement this for a custome...
This simple question, I know how to do by CLI but I was wondering if it is posible to check via GUI interface. Regards!
We recently installed stacks of the 4950's and over the past few weeks they are repeatedly failing and breaking to form individual switch units. The current spec is HW: 11, FW: 7.5.0.2, SW: v7.5.0.007. Spanning tree and SLPP are both configured on un...
In this case looping on new port between Firewall and Core-Switch. Could you please advise for configure on core-switch.
What's the mean about the promote symbol 'CP1' in the VSP 4850 switch show logfile command ? Can I change it to another word ? like 'vspswitch ' CP1 [03/20/70 06:48:48.072] 0x0027458a 00000000 GlobalRouter SW INFO Chassis reboot initiated from C...
